Adaptek Automation Technology

• Remote Temperature Monitoring and Control is a multifunctional device for remote environmental monitoring and control, designed to work in Ethernet networks.
• It can be managed by WEB interface, SNMP programs and user applications.
• The controller can be used as standalone device or as a part of data acquisition (SCADA) systems.
• RTM102 has two relays with normally open and normally close contacts.
• The both relays can be activated locally from status of monitored parameters or remotely  by WEB interface, SNMP managers and HTTP/XML API commands.
• RTM102 utilizes special schematic for long 1-Wire interface support, up to two temperature or temperature+humidity sensors can be connected.
• Along with ambient parameters, two analog voltages and status of two digital inputs can be monitored.
• For every parameter can be sent e-mail and/or SNMP trap for any alarm condition.

                       ^{Specification:}

                         Overview

• TCW122B-WD is an Ethernet controller, specially designed for IP watchdog monitoring.

• It controls the functionality of a device or a network by transmitting or receiving respectively ICMP echo request or ICMP echo reply. 

• If there is no ICMP echo (ping) for certain time, the appropriate relay is activated and this can restart the monitored device or network switch.

• TCW122B-WD has 2 digital and 2 analog inputs, 2 relay outputs and 1-Wire interface and it also can be used for general monitoring and control of environmental monitoring of server rooms.

•For every of monitored parameters – temperature, humidity, analog voltage and status of digital input, SNMP trap can be sent, if it goes outside of previously set-up range.

•The relays can be activated remotely (WEB and/or SNMP) or automatically from presence/absence of ping (ICMP echo request or echo replay).

• Password protected web based configuration and control.

• 1-Wire interface for up to 2 temperature (TST1XX) or temperature/humidity (TSH2xx) sensors.

• 2 relay outputs with NO and NC contacts;

• 2 analog inputs with 0 to 60V-DC range;

• 2 digital input with “dry contact” or “logic level” mode;

• SNMP v.1 support;

• SNMP trap messages sending under certain conditions;

• VLAN and MAC address filtering;

• Remote FTP firmware update.

The device has all necessary functionality to solve the problems of internet service providers like:

• IP watchdog monitoring of small and medium networks.
• Monitoring of temperature and humidity in server rooms.
• Control and management of ISP networks.
• Remote control of electric devices.

Additional Information:

• Item Code: S520-ET

• GSM/GPRS data loggers are used in many applications in various industries.
• These help in keeping a continuous watch and control sensitive data.
• Adaptek GSM/GPRS Temperature Monitoring device can have a built in modem to transmit data continuously to a central server. 
• This central server stores the data for monitoring and report generation later on.
• But what is we want to retrieve data in a central control room from several remotely installed machines.
• The answer would be same - a wireless GSM/GPRS data logger/RTU but with a central server and front end web based application.

 We have three components in this case:

• Ø GSM/GPRS wireless Temp. Humidity Device.
• Ø A Server Application Installed on a PC installed in the central control room.
• Ø A Web Based Monitoring Interface.

GSM/GPRS wireless Temp. Humidity Device:

• This GSM/GPRS device will get the data from the remotely installed machine through a sensor, a temperature sensor, a humidity sensor.
• A Server Application Installed on a PC installed in the central control room:
• The PC would be connected to internet with a static IP.
• A server application is installed on the PC to receive data from several GSM/GPRS wireless data loggers/RTUs.

Ø A Web Based Monitoring Interface:

• This interface receives data from the central server. You can select a GSM/GPRS wireless data logger/RTU on this screen.
• You can view live data in real time of selected GSM/GPRS wireless data logger.
•  User can set SMS Alerts for Hi/Low values of parameters. SMS can be sent on Pre-Registered mobile Numbers.
•  Once you insert the SIM card, it could alarm and report to user when the temperature and humidity goes above or below your preset value via call and sms.
•  User could also send text to check the temperature and Humidity in real-time.

Typical Applications

• Server Room Monitoring.
• Poultry Forms.
• Archives.
• Laboratory and Quality Test Workshops.
• Factories.
• Hospital Room Monitoring.
• Air-Conditioned Rooms.
• Cold Storage Monitoring.
• Green House Monitoring.