Send Email
Send SMS
Search
Adaptek Automation Technology
Adaptek Automation Technology


Converters And Repeaters

A Serial Convertor is a bridge between the Ethernet and RS 232. Users can create virtual COM Ports mapped to the COM Ports of the controller. It is the most cost effective method to combine the original serial device withEthernetcommunication ability.


Isolated Hub

REQUEST CALLBACK

Isolated Hub
Approx. Rs 485 / Piece
Get Best Quote

Thanks for Contacting Us.

Product Details:
Applicationwireless network modem
Network Speed(Mbps)3000m at the rate of 9600bps
Number of Ports/Pins256 nodes

Features:


1. 8 ports cards insert optical isolation RS485/422 HUB
2. Star structure, bi-directional Converter RS232 to RS485/422 or RS485/422 repeater
3. Reach up to 3000m at the rate of 9600bps
4. 600W surge protection,15KV ESD protection, built-in short circuit protection
5. Each port 3000V optical isolation separately
6. Support stage connection, each port support 256 nodes loopback
7. Data direction auto-turnaround, no flow control is necessary.

 

Yes! I am Interested

CAN Bus Modules

REQUEST CALLBACK

CAN Bus Modules
Ask for Price

Thanks for Contacting Us.

Product Details:
ColourGrey
MaterialPlastic
Product TypeBus Modules

We are the leading manufacturers and suppliers of the CAN Bus Modules.
Yes! I am Interested

USB to CAN Converter

REQUEST CALLBACK

USB to CAN Converter
Ask for Price

Thanks for Contacting Us.

Product Details:
ModelI-7531
ColorGrey, Black
Number of Ports2
Power Supply220 V
IndicatorLED

The USB to CAN Converter is an isolated CAN repeater that can be used to establish a physical coupling of two segments of a CAN bus system. This module is designed to isolate the noise and disturbance between the two CAN ports of the I-7531. When the CAN signal is decayed because of the rough bus cable or noise, the I-7531 can recover the shape of the CAN signals to the original ones. Tree topologies can be implemented as well as long drop lines using the I-7531. In order to use the I-7531 easily, the module can automatically adjust the baud rate by itself to match the CAN network. Users just connect the I-7531 with the CAN buses, check the terminator resistor and power it on, subsequently the I-7531 enable to work normally.


Additional Information:

  • Item Code: 8565
Yes! I am Interested

RS-232/422/485 to Fiber Optic Converter

REQUEST CALLBACK

RS-232/422/485 to Fiber Optic Converter
Ask for Price

Thanks for Contacting Us.

Backed by rich industry experience, we are offering an extensive range of RS-232/422/485 to Fiber Optics Converter. Manufactured by our highly accomplished professionals using quality approved components with the help of latest technology, offered product is available in various technical specifications as per the specific requirements of clients. The offered product is checked on several quality parameters by our experts to ensure their high quality and durability.

Features:

  • Compact Design
  • Fine finish
  • Low maintenance

Specifications:

  • Auto Switching Baud Rate: 300-15200 BPS
  • ESD Protection: RS-232/422/485 Data Line
  • Power Input: +10 ~ +30 VDC
  • Operating Temperatures: -25°C ~ +75°C


Additional Information:

  • Item Code: 2541
Yes! I am Interested

Rs232/485 To Zigbee Converter

REQUEST CALLBACK

Rs232/485 To Zigbee Converter
Ask for Price

Thanks for Contacting Us.


RS232/485 TO Zigbee Converter

The Zigbee products is high performance products designed for industrial application, the transmission distance can achieve 2 km in the open. As using 2.4G DSSS spread spectrum technology, the anti-jamming capability is strong. Compared to Wifi, its wireless connection is farther, connection speed is faster, anti-jamming capability is stronger, networking is more convenient.

The ELAN-7502 products can be configured to relative link, as point-to-point communication or broadcast mode, also as point to multipoint mode. Can constitute star type and MESH network structure. The configuration can be done through serial port.

1. Long distance Zigbee communication solution, high performance, high stability. The communication distance can be up to 2km.

2. Big data transmission no packet loss. Duplex transmission under 38400bps the data doesn’t loss packet and no pause, data smoothness.

3. ZLAN9503 has multi-function of Zigbee to Ethernet, realize Zigbee to TCP/IP, can be configured as TCP server, TCP client, UDP mode and so on. Equipped with Windows virtual serial port and device managing tool ZLVircom, can support virtual serial port.

4. The networking mode of Zigbee is flexible, can have many types: realizing point-to-point, point-to-multipoint; having center node, no center node; star network, mesh network, peer-to-peer network.

5. Network capacity is larger, 16 channel optional, 65535 network ID can be freely set.

6. 6 kinds of LED lights separately indicate data flow direction, TCP/IP network status, Zigbee signal and connection state, intuitively response equipment status.



    Additional Information:

    • Item Code: I-2533
    Yes! I am Interested

    CAN Bus To Fiber Optic Converter

    REQUEST CALLBACK

    CAN Bus To Fiber Optic Converter
    Ask for Price

    Thanks for Contacting Us.

    Product Details:
    Number of Ports/PinsUpto 100 Ports
    Fiber PortST (Multi-mode)
    Wavelength850 nm
    Baud Rate upto500 kbps

    Fiber Optic Transmission medium is a good material to protect data transmission from EMI/RFI interference and has been used in harsh environment extensively. On the other hand, CAN bus is famous in industrial application. In order to solve the problem between different transmission medium, I-2532 is specially designed for converting the electrical CAN bus signal to fiber optic cables.

    The fiber length between two I-2532s can be up to 1.4km (4593ft), it is mainly decided by the cable attenuation of fiber and the CAN bus baud. I-2532 is the economic solution for applications which require protecting the data transmission from electrical exposure, surges, lightning or chemical corrosion.

    Features:

    • Compatible with CAN specification 2.0A and 2.0B
    • Fully compatible with the ISO 11898-2 standard
    • Support baud rate up to 500Kbps
    • Jumper for 120Ω Terminator resistor of the CAN bus
    • Fiber Port: ST (Multi-mode)
    • Wave Length: 850 nm
    • Auto-baud detection
    • up to 100 nodes on CAN port
    • Removable terminal block
    • Mount easily on DIN-rail

    Application:

    • · Control System
    • · Building Automation
    • · Factory Automation
    • · Distributed data acquisition

     

     



    Additional Information:

    • Item Code: I-2532-Converter
    Yes! I am Interested

    10/100/1000M Ethernet SFP Media Converter

    REQUEST CALLBACK

    10/100/1000M Ethernet SFP Media Converter
    Ask for Price

    Thanks for Contacting Us.

    Product Details:
    BrandAdaptek Automation
    Number of Ports/Pins2

    10/100/1000M Ethernet SFP Media Converter

    Features:
    1. Accord to IEEE802.1 10Base-T, IEEE802.3u 100Base-TX, IEEE802.3ab 1000Base-TX, IEEE802.3z 1000Base-SX/LX
    2. MDI/MDI-X auto negotiation, 10M/100M/1000M auto negotiation
    3. Supports full /half duplex, Point-to-point transparent transfer
    4. With one SFP slot
    5. Plug-and-play, easy to installation
    6. Can insert to 2U 19", 14 slots Rackmount(power external) .
    Yes! I am Interested

    10/100M Managed Ethernet Media Converter

    REQUEST CALLBACK

    10/100M Managed Ethernet Media Converter
    Ask for Price

    Thanks for Contacting Us.

    10/100M Managed Ethernet Media Converter

    Features :

    1. Accord to IEEE802.1 10Base-T, IEEE802.3u 100Base-TX, IEEE802.3 100Base-FX
    2. MDI/MDI-X auto negotiation, 10M/100M auto negotiation
    3. Supports full /half duplex, Point-to-point transparent transfer
    4. Support WEB,SNMP,TELNET management, upgraded online via TFTP
    5. The module can be inserted into 2U 19", 17 slots Rackmount
    6. Manageable stand-alone media converters in remote end.
    Yes! I am Interested

    CAN BUS Converter

    REQUEST CALLBACK

    CAN BUS Converter
    Ask for Price

    Thanks for Contacting Us.

    Product Details:
    Module NameI-7530
    CAN SpecificationISO-11898-2
    Baud Rate10k ~ 1M bps
    Connector9-pin female D-Sub
    Modbus RTU SlaveNo

    We are offering CAN BUS Converter to our clients.

    Features:
    Module NameI-7530I-7530TtM-7530I-7530AI-7530A-MRI-7530-FT
    Pictures
    CAN Interface
    CAN SpecificationISO-11898-2ISO-11898-2ISO-11898-2ISO-11898-2ISO-11898-2ISO-11898-3
    CAN TransceiverNXP 82C250NXP TJA1042NXP TJA1042NXP 82C250NXP 82C250AMIS 41682
    Baud Rate (bps)10k ~ 1M bps10k ~ 1M bps10k ~ 1M bps and user-defined10k ~ 1M bps10k ~ 1M bps and
    user-defined
    10 k ~ 125 k
    CAN FilterYesYesYesYesYesYes
    CAN Isolation3000 VDC for DC-to-DC, 2500Vrms ~ 3750Vrms for photo-coupleNone
    Terminator ResistorBuilt-in 120ΩBuilt-in 120ΩNoneBuilt-in 120ΩBuilt-in 120ΩBuilt-in 1kΩ
    Max FPS (@1Mbps)279 ~ 360279 ~ 360426 ~ 552279 ~ 360370 ~ 1250279 ~ 360
    CAN FIFO1000 frames1000 frames256 frames1000 frames128 frames1000 frames
    UART Interface
    UARTRS-232RS-232RS-232RS-232 / RS-485 / RS-422
    (can't be used simultaneously)
    RS-232
    Baud Rate (bps)110 ~ 115200110 ~ 115200110 ~ 230400110 ~ 115200110 ~ 230400110 ~ 115200
    Connector9-pin female D-Sub9-pin female D-Sub9-pin female D-SubScrewed terminal blockScrewed terminal block9-pin female D-Sub
    UART FIFO900 frames900 frames256 bytes900 frames256 bytes900 frames






    y
    Modbus RTU SlaveNoNoNoNoModbus RTU SlaveNo
    Yes! I am Interested

    CAN Repeater

    REQUEST CALLBACK

    CAN Repeater
    Ask for Price

    Thanks for Contacting Us.

    Features: Compatible with CAN specification 2.0A and 2.0B Fully compatible with the ISO 11898-2 standard Maximum communication baud : 800Kbps 2500 VRMS photo coupler isolation on the CAN side 3KV galvanic isolation among the power supply and 2 CAN ports Jumper for 120£[ terminator resistor of the CAN bus Two CAN channels Auto-baud detection up to 100 nodes on each CAN port Removable terminal block Mount easily on DIN-rail.
    Yes! I am Interested

    E1 To Ethernet Interface Converter

    REQUEST CALLBACK

    E1 To Ethernet Interface Converter
    Ask for Price

    Thanks for Contacting Us.

    Product Details:
    Number of Ports/Pins2
    Power SupplyAC 220 V
    Supports Conversion10/100Base-TX and 100 Base-FX
    Number of Modules16

    Features :

    1. Rate N¡Á64Kbit/s (N=1~32)
    2. Support the loopback of local analog/digital interface
    3. Support pseudo-random code test function
    4. Supports conversion between:
    (1)10/100Base-TX and 100 Base-FX
    (2)10/100Base-TX and G.703
    (3)100base-FX and G.703
    5. Available with independent structure and 19-inch Rack-mountable structure Rack-mountable structure can be inserted with 16 modules
    6. AC 220V and DC ¨C48V inputs may be selected for both structure
    7. For Rack-mountable fiber optic modems, dual power supply heat backup is provided to ensure a high operating reliability
    Yes! I am Interested

    Isolated RS232 to RS485/422 Converter

    REQUEST CALLBACK

    Isolated RS232 to RS485/422 Converter
    Ask for Price

    Thanks for Contacting Us.

    Product Details:
    BrandAdaptek Automation
    ModelRS232
    Voltage9 VDC
    Power1500 W

    Features :
    1. 9VDC power input, 2500V optical isolation
    2. Plug-and-Play(hot-pluggable, data format auto-sensing & self-adjusting)
    3. Data direction auto-turnaround, no flow control is necessary
    4. 1500W surge protection, 15KV ESD protection
    5. 1800m transfer distance (115200bps)
    6. RS-485/RS-422 connector RJ45, DB9M or 5 bit terminal block.
    Yes! I am Interested

    PROFIBUS to RS-232/422/485 Converter

    REQUEST CALLBACK

    PROFIBUS to RS-232/422/485 Converter
    Ask for Price

    Thanks for Contacting Us.

    Product Details:
    ModelRS-232/422/485
    Input power12 VDC ~ 24 VDC
    Isolation voltage3000 VDC
    High Speed480 Mbits

    Banking on our huge knowledge and expertise in this area, we are readily instrumental in providing a quality advanced collection of PROFIBUS to RS-232/422/485 Converter.


    Yes! I am Interested

    RS-232 To 5V TTL Converter(DB9)

    REQUEST CALLBACK

    RS-232 To 5V TTL Converter(DB9)
    Ask for Price

    Thanks for Contacting Us.

    Product Details:
    BrandAdaptek Automation
    ModelRS-232 To 5V TTL

    RS-232 To 5V TTL Converter(DB9)

    Features:
    1. Port Powered: no external power is necessary
    2. Data Direction, auto-turnaround, no flow control is necessary
    3. Plug-and-Play (Device is hot-pluggable)
    4. Built-in surge protection, static protection and circuit protection.
    Yes! I am Interested

    RS232 / RS485 Wifi Device Servers

    REQUEST CALLBACK

    RS232 / RS485 Wifi Device Servers
    Ask for Price

    Thanks for Contacting Us.

    Product Details:
    Number Of Ports/Channels2
    Voltage InputDC5~18V
    InterfaceRS232
    Current2A
    ColorBlack

    RS232 / RS485 Wifi Device Servers serial server is a wireless networking server, which is used for the project of RS232/RS485 serial equipment to WIFI or Ethernet networking. It can be controlled by mobile phone or laptops, also can be connected to the remote server.


    Features:
    • Support hardware flow control (RTS/CTS) RS232 interface, male mouth(needle) consistent with computer pin definition
    • DC5~18V wide voltage input, can provide 2A current MP1482DS DCDC power supply chip, keep system reliability.
    • RS232 RS485 automatic switching
    • RJ45 network connection, support wired Ethernet transmission
    Yes! I am Interested

    RS232 RS485 To Ethernet Modbus Serial Converter

    REQUEST CALLBACK

    RS232 RS485 To Ethernet Modbus Serial Converter
    Ask for Price

    Thanks for Contacting Us.

    Product Details:
    Minimum Order Quantity1 Piece
    Number of Ports/Pins3
    Serial baud rate from600bps to 230.4K bps
    Auto Port Speed10/100Mbps
    Auto Port TypeMDI/MDIX,RJ45 port
    ColorBlack

    RS232 RS485 To Ethernet Modbus Serial Converter is a serial rs485&rs232 to Ethernet server, used for data transparent transmission. USR-TCP232-410S is a dual serial server, which supports rs232 & rs485 working at the same time. It is based on Cortex-M4 solution And the internal of the serial server integrates TCP/IP protocol stack.Besides, USR-TCP232-410S has the function of the terminal power supply.

    Feature:
    • Multiple indicator lights for convenient debugging
    • Power-line terminal for industrial application
    • ARM kernel and TCP/IP protocol stack
    • TCP Server,TCP Client,UDP,UDP Server and HTTPD Client work mode
    • Two ports can work independently at the same time
    • Support virtual serial port and provide corresponding software USR-VCOM
    • Serial baud rate from 600bps to 230.4K bps;Check bit of None,Odd,Even,Mark and Space
    • DNS and DHCP supported
    • Provide PC TCP/IP SOCKET programming example,VB,C++,Delphi,Android,IOS
    • Built-in webpage;also can customize webpage for users
    • Reload button,one key to restore default settings
    • RJ45 with Link/Data indicator light,built-in isolation transformer and 2 KV electromagnetic isolation
    • The global unique MAC address bought from IEEE,user can define MAC address
    • Support upgrade firmware via network
    • Support keep alive,rapidly detect dead links
    • Support account and password,can be used to page login and network settings
    • Support one channel Web socket,realize bidirectional transparent transmission between webpage and serial 0
    • Support Modbus RTU to Modbus TCP
    • Support UDP broadcast function,send and receive data from all ip in the network
    Yes! I am Interested

    RS232 to CAN Converter

    REQUEST CALLBACK

    RS232 to CAN Converter
    Ask for Price

    Thanks for Contacting Us.

    Product Details:
    BrandAdaptek Automation
    ModelRS232
    Power Input230 V AC
    Optical Isolation1.5 V

    RS232 to CAN Converter

    Features:
    • Compatible with CAN specification 2.0A and 2.0B
    • Fully compatible with ISO 11898-2 standard (for I-7530)
    • Fully compatible with ISO 11898-3 standard (low speed fault tolerance) (for I-7530-FT)
    • Support various baud rate from 10K bps to 1M bps
    • Jumper for 120 £[ terminator resistor (for I-7530)
    • Software configurable CAN and RS-232 communication parameters
    • Power, data flow and error indicator for CAN and RS-232
    • Watchdog inside
    • Support transparent communication mode
    • 1000 frames in CAN received buffer and 900 frames in RS-232 received buffer.
    Yes! I am Interested

    RS232 to E1 Converter

    REQUEST CALLBACK

    RS232 to E1 Converter
    Ask for Price

    Thanks for Contacting Us.

    Product Details:
    BrandAdaptek Automation
    Power Input230 V AC
    Isolation voltage3000 VDC
    Product TypeRS232 to E1 Converter

    RS232 to E1 Converter

    Features :

    1. Convert RS232 interface to E1(2M unframed G.703) interface
    2. Support line recovery clock, local clock and equipment clock
    3. Support E1 port loop
    4. E1 (G.703 ) interface support 120ohm (RJ-45) and 75ohm (BNC double coaxial)
    Yes! I am Interested

    RS232/485/422 to Fiber Converter

    REQUEST CALLBACK

    RS232/485/422 to Fiber Converter
    Ask for Price

    Thanks for Contacting Us.

    Product Details:
    MaterialPVC
    Number of Ports3
    ColorWhite
    IndicatorLED
    Type RS232

    As a specialist in this domain, we are offering a distinguished range of RS232/485/422 to Fiber Converter. Our offered product is widely used in various commercial and residential sectors. The entire range is designed using pristine-grade basic material and leading-edge technology. Additionally, the entire range is rigorously checked at every stage of production. Clients can avail this product from us in a number of specifications.


    Features:

    • Optimum performance
    • Simple functionality
    • Reliability
    Yes! I am Interested

    RS485/422 to Fiber Optic Converter

    REQUEST CALLBACK

    RS485/422 to Fiber Optic Converter
    Ask for Price

    Thanks for Contacting Us.

    Product Details:
    VoltageExternal 5VDC
    Power600W
    Speed500Kbps
    ColorWhite
    Number of Ports2

    We are offering RS485/422 to Fiber Optic Converter to our clients.

    Features :
    1. Extend RS-485/422 transmission up to 120Km with single-mode
    2. Transmit asynchronously, point to point, speed reach 500Kbps
    3. Examine signal speed automatically, zero delay time
    4. Plug-and-Play(hot-pluggable, data format auto-sensing & self-adjusting)
    5. Power External 5VDC
    6. 600W surge protection, 15KV ESD protection.
    Yes! I am Interested

    Rack Mount 14 Slots Ethernet Media Converter

    REQUEST CALLBACK

    Rack Mount 14 Slots Ethernet Media Converter
    Ask for Price

    Thanks for Contacting Us.

    Product Details:
    BrandAdaptek Automation
    Model Name/NumberEthernet
    No of Slots14

    Features :
    1.Adopt insert-draw design, Easy to load and unload, Plug-and-play, support hot-swappable
    2. 19 inch 2U, easy to install
    3. Each Rack have 14 insert slots, can insert 1-14 different media converters, high capability, easy to upgrade
    4. Full aluminums metal shell, high shield, high anti-jamming
    5. Adopt auto-adapt technology. Do not adjust electrics and optics when installation
    6. Redundant Power Supply, Low consumption, and credibility
    7. Full working indicator light, easy to maintenance
    8. Average no MTBF is up to 50 thousands, accord to telecom standard.
    Yes! I am Interested

    Zigbee Converter

    REQUEST CALLBACK

    Zigbee Converter
    Ask for Price

    Thanks for Contacting Us.

    Product Details:
    Transmission Frequency Range2.405 GHz and 2.48 GHz
    Number of Channels16 channels
    SeriesZT-2000
    Supported OSWindows
    ColorBlack

    We are offering Zigbee Converter to our clients. The ZT-2550 and ZT-2551 series modules are small-sized wireless ZigBee converters based on the IEEE802.15.4 standard that allow RS-232, RS-485 interface to be converted to a personal area ZigBee network. The typical transmission of ICP DAS ZT series ZigBee products is 700 meters (LOS, line of sight), with a transmission frequency range of between 2.405 GHz and 2.48 GHz, separated into 5 MHz sectors, providing 16 channels and 16384 PAN IDs. ZT-2000 series is not only a long distance wireless converter but also can act a ZigBee router to extend the transmission range and improve the quality of wireless signal.
    ZT-2000 series products are specification for a suite of high level communication protocols using small, low-power digital radios module, which are fitted the ZigBee 2007 (ZigBee Pro) of ZigBee Alliance. In the ZigBee network, it is only allowed one ZigBee Host and called “ ZigBee Coordinator”, ZT-2550 series products, are used to initialize and manager the routing. In addition, One ZigBee network are able to manager 255 ZigBee router and responsible for receiving or bypassing data from parent or child node.
    A Windows compatible GUI configuration utility is available. The utility allows users to set different configurations based on the type of application, together with several of required ZigBee variables such as Pan ID. The friendly user interface is also helping user be familiar with ZT-2000 series.
    Yes! I am Interested

    Digital Signage Player

    REQUEST CALLBACK

    Digital Signage Player
    Ask for Price

    Thanks for Contacting Us.

    Product Details:
    MaterialMild steel
    Product typeSignage Player
    DisplayDigital

    Digital Signage Player for Displaying Restaurant Menu Boards, Advertising, Corporate Messaging, Product Promotion STORE FRONT DIGITAL SIGNAGE DISPLAYS

    Retailers are always on the lookout for new and interesting ways to attract customers, and storefront displays have played a big role in bringing in shoppers. It’s the same whether they’re on a busy street, in a pop-up retail location or part of a mall-based retail chain.

    MEETING ROOM DISPLAYS

    QL is the perfect solution for all your meeting room signage needs. Authorized users can monitor and manage meeting room information directly in the CMS, QL can be interfaced with most room management software to create a fully automated system. Book rooms in QL or use your own room management software […]

    ELEVATOR SCREENS AND DISPLAYS

    Elevator displays are generally located in buildings where you already have a fairly good grasp of the demographics. It’s an ideal location to deliver targeted ads and programming that will appeal to viewers. This is a great opportunity to reach out to your audience. Why not take advantage of it? Perhaps the building’s food […]

    INFORMATION DISPLAY SYSTEMS

    Digital Signage for information display systems is used by the transportation industry. Flight Information Systems are used in airports to display flight information to passengers. Digital displays communication have been used for years to inform about arrivals and departure flights in real-time. Displays are located inside and around airport terminals. Larger […]

    CONTENT TRIGGERING

    Need to display emergency messages, amber alerts or other time sensitive information? The QL Trigger SDK can handle all your instant notification needs. Launch any content or playlist instantly from an external trigger. Content triggering is based on external data, keypads, sensors, Kinect or third party software. Display any type of […]

    TABLET AND MOBILE

    QL engine runs on Google Android tablets and mobile either in passive mode or with interactivity. Tablets provide convenient all-in-one package, in a size good for a small area. It’s easy to change the message quickly, and if you have multiple tablets all with Internet access, you can remotely push digital […]

    LED DISPLAYS

    LED Displays are bright, immersive and modular. This technology was originally used outdoor for digital billboards and LED signs. A new generation is now available for indoor applications and windows front. LED signs feature a lower resolution than traditional displays. It is used whenever viewers stand at five to ten meters […]

    TOUCH SCREEN PUBLIC DISPLAY

    Touch enabled applications are becoming an essential component of any building lobby or commercial space. You’ve probably already encountered a touch screen display at your local shopping mall or when visiting a public building. Those screens are mainly used for wayfinding and information kiosks with interactive content delivered in HTML, HTML5 and Flash. […]



    Additional Information:

    • Item Code: AAT-690
    Yes! I am Interested

     
    X


    Contact via E-mail
    Contact via SMS
    Adaptek Automation Technology
    Elancheliyan Paramasivam (Chairman & Managing Director)
    No. 13, F- 3, 2nd Floor, 2nd Main Road, Nehru Nagar, Adyar, H.D.F.C. Bank A.T.M., Ground Floor Near Nalli Silks, Opposite To SBI Indra Nagar Branch, Adyar Nehru Nagar,
    Chennai - 600020, Tamil Nadu, India
    Call Us: 
    Call Response Rate: 86%
    Share Us :
    F G T L



    Home  |   About Us   |  Product Range  |  Site Map  |   Contact Us   |   Mobile Site

    © Adaptek Automation Technology. All Rights Reserved (Terms of Use)
    Developed and Managed by IndiaMART InterMESH Limited

    Adaptek Automation Technology