Send Email
Send SMS
Search
Adaptek Automation Technology
Adaptek Automation Technology


Protocol Converter

AProtocol Ethernet controller is an integrated circuit chip that controls Ethernet communications. Ethernet is the method most computers use to communicate with each other. The Internet cable, which plugs into your computer, transfers data to the Ethernet controller, which decodes the data and puts it into a form your computer can use.


E1 to Ethernet Converter

REQUEST CALLBACK

E1 to Ethernet Converter
Ask for Price
Product Details:
Number of Ports/Pins2,4,6
Applicationindustries

 BD-E1-ETH is a single port E1 to Ethernet converter (also called Ethernet over E1 TDM converter) that provides high-speed LAN-to-WAN connectivity. Plugging directly into the 10/100Base-T port of a hub or LAN switch, the BD-E1-ETH provides E1 access at connection data rates of 2.048 Mbps. The E1 converter is an excellent choice for internet access as well as LAN-to-LAN services.

  The E1 to ethernet converter can support mini desk type case and 19" rack mount type case. The 19" rack mount E1 converter can support double power (two AC or two DC or AC+DC),which strength the operation stability.

Features:

  • Ethernet port 10/100M half/full duplex auto-negociation, supporting VLAN.
  • Ethernet port interface supports AUTO-MDIX.
  • Provides 2 clock types: E1 master clock, E1 line clock.
  • Provide LAN auto reset function, run more stably.
  • Has the function of pseudo-random code testing, convenient for opening of the circuit, and can be used as an error code instrument. 
  • Have three LoopBack Modes: E1 interface LoopBack (ANA),LAN interface LoopBack (DIG),command the remote LAN interface LoopBack (REM) .
  • E1 port support BNC(75ohm) dual coax and RJ45(120ohm) twisted-pair G.703 connections, and support 75ohm/120ohm adaptive ;
  • With abundant presentation function of Ethernet data, can detect real-time data communication status.
  • Can realize SNMP management in our chassis installation
Yes! I am Interested

E1 to V.35 Protocol Converter

REQUEST CALLBACK

E1 to V.35 Protocol Converter
Ask for Price

:E1 to V.35/V.24 converter provides physical level conversion between ITU-T G.703 standard E1 interface and standard V.35 interface, it can receive synchronous 2.048 Mbps data from E1channal and transmit the data to router, DDN, multiplexer or other equipment, thus providing secure and seamless communicating connection between equipments with different interfaces in the network. It is widely applied in the interface between WAN and LAN and in video monitoring. The pattern of data interface is DCE, which can be connected with DTE or DCE equipment. 

Features:

  • the E1 to V.35 converter/V.24 conforming to ITU-T V.35, G.703, and G.704 standard;
  • E1 interface supports 75ohm unbalanced or 120ohm balanced;
  • V.35 supports hot plugging;
  • V.35 interface has many kinds of clock source and timing for option; 
  • provides four clock types: E1master V.35/V.24external, E1master V.35/V.24internal, E1submissive V.35/ V.24 external, E1 submissive V.35/ V.24 internal;
  • V.35/ V.24 interface can be tail-connected with other DCE equipment;
  • provides 3 kinds of loop-return function, namely E1 self-looping at local end, V.35 self-looping at local end, and V.35 being ordered to self-loop at remote end (non- framing model not having this function);
  • AC220V and DC-48V power supply pattern may select, DC-48 and +24V power are not divided to positive and negative pole for simple installation and maintenance;
  • has the function of pseudo-random code testing, which brings great convenience for installation, debugging and maintenance of equipment;
Yes! I am Interested

E1 to v.35 Converter

REQUEST CALLBACK

E1 to v.35 Converter
Ask for Price

The framed E1 to V35 converter provides conversion between ITU-T G.703 standard E1 interface and V.35 port.The V.35 converter realize V.35 over E1 conversion and provides safely seamless connection of communication between different devices with different interfaces. It can random use timeslot from G.703 E1 to compose N*64K (N=1-32) V35 channel, suitable for device that has part slot unused, and device transferring data only has V35 output. Data interface mode is DCE, can connect with DTE or DCE device.
  • Monitoring remote device from local device (having 2 row indicator LED, upper indicates local, lower indicates remote
  • E1 port can randomly choose time slots from 31 slots with hardware.
  • Provides many kinds of clock ways: E1 master clock, and E1 line clock, V.35 master clock, V.35 external clock.
  • Having 3 loop back functions: E1 local loop, V.35 local loop, and let remote V.35 loop.
  • Having pseudo random code test function, can used as a 2M Protocol Analyzer
  • Support 120Ω/balance and 75Ω/unbalance impedance.
  • V.35 port supports hot plug, can connect with DTE or DCE.
  • E1 interfaceStandard: compatible with G.703 standard.Rate: N x 64Kbps, N= 1-32Coding: HDB3Impedance: 75Ω (unbalance), 120Ω (balance)Connector: BNC (75Ω), RJ45 (120Ω)Jitter Performance: Meet G.742 and G.823Clock: internal clock, Recovery clock. V.35 interface Rate: N x 64Kbps, N= 1-32Interface: compatible with V.35 standard.Connector: DB25 socket Connect mode: DCE Clock: G.703 recovery clock, internal clock, V.35 external clock.
Yes! I am Interested

G.703 E1 to RS232 Converter

REQUEST CALLBACK

G.703 E1 to RS232 Converter
Ask for Price

RS232 rate support 0~115200Kbps self-adapt;Support  RS232 interface (TXD,RXD,GND)RS232 support hot-plug, connection to DTE or TCE device;offer 2 kinds of loop-return function, namely E1 self-looping at local end (ANA) and RS232 self-looping at local end (REM)AC220V and DC-48V for option, and DC-48V is  not divided into positive and negative pole with simple installation and maintenance;has the function of pseudo-random code testing(PATT), which brings great convenience for installation, debugging and maintenance of equipment;E1 interface supports 75ohm, unbalanced and 120ohm balanced impedance at the same time;
E1 InterfaceLine Rate: 2.048MbpsLine Code : HDBInterface Standard: ITU-T G.703E1 Impedance: 75ohm(unbalance) and 120ohm(balance)Connections : dual coax BNC and 120-ohm twisted-pair (RJ45)Jitter tolerance : finer than G.742 and G.823Clock:                  internal clock, line clockRS232interfaceRate:asynchronous mode 0 to 115200 bps auto-adapt.Interface:                    conform to ITU-T V.24 V.11Connector:          DB9Connect mode:   DCE 
Yes! I am Interested

8E1 to Ethernet Converter

REQUEST CALLBACK

8E1 to Ethernet Converter
Ask for Price

The 8E1 to ethernet converter (also called ethernet over 8E1 converter) uses reverse multiplexing technology to transmit 10/100BaseT data with bonding multi E1 channels,realizing conversion between 1-8 E1 channels and Ethernet interface. It can transmit signals point-to-point from E1 channel to RJ45 interface to realize connection between E1 channel and Ethernet. Being different from general long-distance bridge, the 8 E1 to ethernet convertersupports flexible configuration of 1 to 8 channels E1 and can detect the number of E1 channel and choose available channel. In the meantime, certain difference of transmitting delay is allowed among E1 channels. Line rate is 1968Kbit/s for one E1 channel and bandwidth can reach 15744Kbit/s for 8 E1 channels. When used in 10/100Mbps half/full duplex mode, this equipment can be connected with Ethernet switch or hub (integrated circuit machine) to expand transmitting distance and application scope of Ethernet by making full use of large number of E1 channels in current telecommunication network. It is an excellent solution for connecting Ethernet broadband. This product can be applied in many fields such as connection of LAN and end offices, video ordering (VOD), remote monitor and E1 interface of switches.
  • Realizes transparent transmission of Ethernet data in 1 to 8 E1 channels.
  • Ethernet supports 10M/100M, full/half duplex auto-negociation, supports VLAN.
  • Ethernet port supports AUTO-MDIX (cross over and straight through auto-adapt).
  • Setting CRC alarm limitation to auto isolate lines with low transmitting quality (being cut single-directionally); when error code rate of one direction in 2M branch exceeds the limitation, this direction is cut and the other direction will not be affected, namely the two transmitting directions of Ethernet can be unsymmetrical.
  • Allow 8 E1 channels up to 10ms transmission delay. When the delay exceeds allowed limit range, it can stop transmitting data automatically.
  • Has 2 loop back functions: E1 local loop, E1 remote loop.
  • Supports Dynamic Ethernet MAC address (4096) with local address filter function.
  • E1 interface compatible with ITU-T G.703, G.704, and G.823. not supporting signal timeslot.
  • E1 interface has internal clock recover circuit and HDB3 code/decode circuit.
  • Supports E1 channel hot plug, and auto detect effective E1 channels data transmission will not be cut.
  • Supports 1 to 8 E1 channels customized configuration, auto detect the number of E1 channels and select the available E1 when resetting
  • Yes! I am Interested

    4E1 to Ethernet Converter

    REQUEST CALLBACK

    4E1 to Ethernet Converter
    Ask for Price
    Product Details:
    Network Speed(Mbps)1000
    Model Name/Number3 onedata
    Number of Ports/Pins4 port

    4E1 to 10/100BT ethernet converter used back multiplexing technology, transfer 10M/100M Ethernet data by using multi E1 channels. Realize convert between 1 to 4 E1 channels and Ethernet interface. It can transmit signal of E1 channel to RJ45 interface point to point, realize the connection of E1 channel and Ethernet. It different from normal bridge , supporting 1 to 4 E1 channels customized configuration, auto detecting the number of E1 channels and use the available E1, allow some limiting transfer delay between different E1 channels. Single line speed is 1968Kbits/s, 4 channels can up to 7872Kbits/s. it can connect with Ethernet switch or hub when in 10/100Mbps full/half duplex mode, make use of mass E1 resource in telecommunication networks to expend the transfer distance and application field of Ethernet, is a suitable solution for broadband switch in of Ethernet. It can used in fields such as connecting LANs, connecting end offices, VOD, remote monitor, E1 interface of switches, etc.

     Realize transparent transfer Ethernet data in 1 to 4 E1 channels

  • 10M/100M Ethernet, full/half duplex self adapt, support VLAN.
  • Ethernet support AUTO-MDIX( cross over and straight through self adapt)
  • setting CRC alarm limitation to auto isolate lines with low transfer quality, single direction. When one direction error rate over limitation, disconnect only one direction, the other is not affected. Unbalance in two directions.
  • Allow 4 E1 channels up to 10ms transfer delay. when the delay over the limitation, can stop transfer automatically.
  • Having 2 loop back functions: E1 local loop, E1 external loop.
  • Support Dynamic Ethernet MAC address(4096), having local address filter function.
  • E1 interface compatible with ITU-T G.703,G.704,and G.823. signaling slot not supported.
  • E1 interface having internal clock resume circuit and HDB3 codec circuit.
  • support E1 channel hot plug, and auto detect available E1 channels not pause the transmission.
  • supporting 1 to 4 E1 channels customized configuration, auto detect the number of E1 channels and select the available E1 at reset.
  • E1 Support 75ohm/unbalance impedance or 120ohm/balance for option
  • support reset remote system from local system.
  • having Ethernet monitor auto reset function
  • Yes! I am Interested

    E1 to 4v35 Converter

    REQUEST CALLBACK

    E1 to 4v35 Converter
    Ask for Price

    • realizes long-distance monitoring of this end equipment to the far-end equipment (two-row indicating lamp, upper row indicating local status, lower row indicating far-end status.)
    • has Console port and supports super terminal control device;
    • realizes random time slot choice from 31 slots with hardware;
    • provides four clock types: E1 master clock, E1 line clock, V.35 master clock, V.35 external clock;
    • provides 3 kinds of loop-return function, namely E1 self-looping at local end, V.35 self-looping at local end, and V.35 being ordered to self-loop at remote end;
    • has the function of pseudo-random code testing, convenient for opening of the circuit, and can be used as an error code instrument;
    • E1 supports rate of N*64k (N=1-32), which can be regulated from 64K to 2048K;
    • supports 75ohm unbalanced and 120ohm balanced impedance at the same time;
    • V.35 interface supports hot plugging and DTE and DCE interconnection;
    • RS232 channel can transfer asynchronous serial data with self-adaptable baud rate of 300 to 19200;
    • network management interface uses SNMP
    •  E1 interface:
      Interface standard: Conforms to G.703 standard 
      Interface rate:  N×64Kbps, N:1~32
      Vibration characteristic: Satisfies G.742 and G.823 standard 
      Transmission capacity: 1*E1 
      Clock type: internal-clock, route clock 
      Connecter: BNC (75 ohm), RJ45 (120 ohm) 
      Interface impedance: 75ohm (non- balanced), 120ohm (balanced)
          V.35 interface:
      Interface speed: Nx64K
      Connector: DB25 to V.35
          RS232 interface:
      Interface rate: 0-19.2Kbit/s                         
          Console port:
      Console port speed: 19.2Kbit/s
    Yes! I am Interested

    V.35 To Ethernet Converter

    REQUEST CALLBACK

    V.35 To Ethernet Converter
    Ask for Price

    BD-ETH-V.35 provides conversion from V.35 to Ethernet, is a good performance, self-study long-distance Ethernet bridge. It is of small volume and low cost and is very suitable for connection application which needs low cost equipment. It can be also used as an extender of LAN

    Yes! I am Interested

    GSM Signal Booster

    REQUEST CALLBACK

    GSM Signal Booster
    Ask for Price

     

    Specification and standards:          

    Model No

    KW20D-AT-26

    Parameter data

    Uplink

    Downlink

    Frequency Range   

    LTE

    2500-2570 

    2620-2690

    Output Power          

    20dBm

    20dBm

    Gain                            

    65±2 dB

    65±2dB

    Bandwidth                      

    60M

    Ripple in Band            

    ≤5dB

    Spurious Emission          

    9KHz~1GHz

    ≤ -36 dBm

    1GHz~12.75GHz

    ≤ -30 dBm

    VSWR                              

    ≤3

    MTBF

    >50000 hours

    Power Supply                    

    AC:100~240V, 50/ 60Hz;DC:5V 1A

    Power Consumption      

    < 5W

    Impedance                    

    50 ohm

    Mechanical Specification

    RF Connector            

    N-Female N

    Dimensions (D*W*H )        

    250*125*54 (mm)

    Net weight                          

    < 2Kg

    Packing size (D*W*H )        

    268*150*65(mm)

     


    ·          

     

      

    ·          


     

      


    Additional Information:

    • Item Code: AGC-140
    Yes! I am Interested

    16-Port RS232/485/422 to Ethernet Server

    REQUEST CALLBACK

    16-Port RS232/485/422 to Ethernet Server
    Ask for Price
    Product Details:
    Number of Ports/Pins16 poirt

    Features:

    1. Adopt 32 bit ARM processor, 125 DMIPS manage ability
    2. 16 serial ports, with support for RS-232/RS-485/RS-422
    3. Support 10/100M Ethernet
    4. Support 300bps-460.8Kbps
    5. Support TCP, UDP, ARP, ICMP, HTTP, TELNET and DHCP protocol
    6. Support across gateway, router communication
    7. Support standard TCP/IP SOCKET
    8. Support Virtual serial driver access and auto connect after the network disconnect
    9. Choice of configuration methods: Windows, TELNET and WEB
    Yes! I am Interested

    4-Port RS232/485/422 To Ethernet Server

    REQUEST CALLBACK

    4-Port RS232/485/422 To Ethernet Server
    Ask for Price

    Features :
    1. Adopt 32 bit ARM processor, 125 DMIPS manage ability
    2. 4 serial ports, with support for RS-232/RS-485/RS-422
    3. Support 10/100M Ethernet
    4. Support 300bps-460.8Kbps
    5. Support TCP, UDP, ARP, ICMP, HTTP, TELNET and DHCP protocol
    6. Support across gateway, router communication
    7. Support standard TCP/IP SOCKET
    8. Support Virtual serial driver access and auto connect after the network disconnect
    9. Choice of configuration methods: Windows, TELNET and WEB
    10. Support DIN-Rail or wall mounting installation.

    Yes! I am Interested

    8-Port RS232/485/422 to Ethernet Server

    REQUEST CALLBACK

    8-Port RS232/485/422 to Ethernet Server
    Ask for Price

    We are the dynamic, business-oriented organization, ranking among the utmost entities in providing a wide assortment of 8-Port RS232/485/422 to Ethernet Server. The offered server is procured from most reliable vendors in the market and is precisely engineered by their skilled engineers using basic components and advanced technology in compliance with set industry standards. Clients can avail this server from us at market leading price.

    Features:

    • Quick response
    • High processing speed
    • High performance
    Yes! I am Interested

    Modbus Gateway

    REQUEST CALLBACK

    Modbus Gateway
    Ask for Price
    Product Details:
    Network Type4G
    Number Of Ports2

    Features1. Support Modbus TCP, Modbus RTU, Modbus ASCII, IP, ARP, DHCP and DNS protocol2. Support 1 Port 10/100M Ethernet3. Support 1 Port RS-485/4224. Support WEB and Telnet configuration5. Convert between Modbus TCP and Modbus RTU/ASCII6. Support RTU Slave, RTU Master, ASCII Slave, ASCII Master four operating modes7. Support ID mapping function, to achieve the management of the host ID8. 300bps~115200bps baud rate and nonblocking communication9. Support IP address and MAC address filtering function10. Slave mode support 16 TCP master connections11. Master mode support 32 slave TCP connection requests12. Support Response Timeout and Interval Timeout setting13. Support cross-gateway and cross-router communication14. IP30 protection grade, metal shell, wall mounted installation15. No fan, low consumption design16. Working temperature: -4075℃
    Yes! I am Interested

    RS-485 to Modbus Ethernet Converter

    REQUEST CALLBACK

    RS-485 to Modbus Ethernet Converter
    Ask for Price
    Product Details:
    Network Speed(Mbps)10000
    Model Name/Number3 onedata
    Number of Ports/Pins2 port

    Features1. Support Modbus TCP, Modbus RTU, Modbus ASCII, IP, ARP, DHCP and DNS protocol2. Support 1 Port 10/100M Ethernet3. Support 1 Port RS-485/4224. Support WEB and Telnet configuration5. Convert between Modbus TCP and Modbus RTU/ASCII6. Support RTU Slave, RTU Master, ASCII Slave, ASCII Master four operating modes7. Support ID mapping function, to achieve the management of the host ID8. 300bps~115200bps baud rate and nonblocking communication9. Support IP address and MAC address filtering function10. Slave mode support 16 TCP master connections11. Master mode support 32 slave TCP connection requests12. Support Response Timeout and Interval Timeout setting13. Support cross-gateway and cross-router communication14. IP30 protection grade, metal shell, wall mounted installation15. No fan, low consumption design16. Working temperature: -4075℃
    Yes! I am Interested

     
    X


    Call Us: +91-8079465020
    Adaptek Automation Technology
    Elancheliyan Paramasivam (Chairman & Managing Director)
    No. 13, F- 3, 2nd Floor, 2nd Main Road, Nehru Nagar, Adyar, H.D.F.C. Bank A.T.M., Ground Floor Near Nalli Silks, Opposite To SBI Indra Nagar Branch, Adyar Nehru Nagar,
    Chennai - 600020, Tamil Nadu, India
    Contact via E-mail
    Contact via SMS



    Home  |   About Us   |  Product Range  |  Site Map  |   Contact Us   |   Mobile Site

    © Adaptek Automation Technology. All Rights Reserved (Terms of Use)
    Developed and Managed by IndiaMART InterMESH Limited

    Adaptek Automation Technology