Adaptek Automation Technology

• Chipset integrated VGA sharing 224 MB system memory
• Dual channel DDR2 533/667 SDRAM up to 4 GB
• PCIe x16 slot for VGA card
• Supports 10/100/1000Base-T Ethernet via dedicated PCIe x 1 bus
• Supports Core 2 Duo FSB 800/1066 MHz
• Supports SATA RAID 0,1,5 and 10 for G2 version

• Supports Intel® Core™ i7/i5/i3 LGA1151 processors with H110 chipset
• Dual Channel (Non-ECC) DDR4 1866/2133 up to 64 GB
• Supports USB 3.0, SATA3.0
• Dual display with VGA and DVI-D/DP (optional)
• Supports Advantech LPC modules
• Supports SUSIAccess and embedded software APIs

• Intel® 10th generation Core™ i9/i7/i5/i3 & Pentium®/Celeron® processor with H420E chipset
• Dual channel (Non-ECC) DDR4 2400/2666/2933 up to 64 GB
• Support VGA and DVI display
• M.2, SATA 3.0, USB 3.2, dual GbEs
• 5 RS-232 and 1 RS-232/422/485 serial ports
• 1 PCIe x16 (Gen 3) and 2 PCIe x4 (x1 Gen 3 link), and 4 PCI expansion slots
• Note 1: Legacy platform is not supported.
• Note 2: dTPM 2.0 module is required to enable Intel vPro and TPM technologies.
• Note 3: Intel® Platform Trust Technology (Intel® PTT) ready for Windows 11.

Additional Information:

• Item Code: I-7530A

Modbus TCP, Modbus RTU, Modbus ASCII, IP, ARP, DHCP and DNS protocol.

• Support 1 Port 10/100M Ethernet.
• Support 2 Port RS-485/422.
• Support WEB and Telnet configuration.
• Convert between Modbus TCP and Modbus RTU/ASCII.
• Support RTU Slave, RTU Master, ASCII Slave, ASCII Master four operating modes.
• Support ID mapping function, to achieve the management of the host ID.
• 300 bps~115200 bps baud rate and non blocking communication.
• Support IP address and MAC address filtering function.
• Slave mode support 16 TCP master connections.
• Master mode support 32 slave TCP connection requests.
• Support Response Timeout and Interval Timeout setting.

• AIMB-70612th/13th Generation Intel® Core™ i9/i7/i5/i3 & Pentium®/ Celeron® ATX with HDMI/VGA, DDR4, USB 3.2, M.2, 6 COMs

• Intel® 12th/13th generation Core™ i9/i7/i5/i3 & Pentium®/Celeron® processor with H610E chipset
• Two DIMM sockets up to 64GB DDR4 3200
• Dual display HDMI/VGA and dual GbE LAN
• M.2, SATA 3.0, USB 3.2 Gen1
• 5 RS-232 and 1 RS-232/422/485 serial ports
• 1 PCIe x16 (Gen 4) and 2 PCIe x4 (x2 Gen 3 link), and 4 PCI expansion slots
• Note 1: Legacy platform is not supported.
• Note 2: dTPM 2.0 module is required to enable Intel vPro and TPM technologies.
• Note 3: Intel® Platform Trust Technology (Intel® PTT) ready for Windows 11.

• NP301 is the serial device server that can make serial device be equipped with networking capability instantly and centrally manage the scattered serial devices and hosts via network.
• The product supports 1 RS-232/RS-422/RS-485 to 1 100M Ethernet copper port.
• It adopts wall mounting to meet the requirements of different application scenes.
• Serial device server supports multiple network protocols, such as TCP, UDP,ARP, ICMP, HTTP, DNS and DHCP protocol.
• It also possesses complete management functions, including Access Control, Rapid Configuration, Online Upgrading and so on.
• Each serial port supports 4 TCP or UDP session connections, and it also supports TCP Server, TCP Client, TCP Auto, UDP, Advanced TCP Server.

• Intel® 10th generation Core™ i9/i7/i5/i3 & Pentium®/Celeron® processor with H420E chipset
• Dual channel (Non-ECC) DDR4 2400/2666/2933 up to 64 GB
• Support VGA and DVI display
• M.2, SATA 3.0, USB 3.2, dual GbEs
• 5 RS-232 and 1 RS-232/422/485 serial ports
• 1 PCIe x16 (Gen 3) and 2 PCIe x4 (x1 Gen 3 link), and 4 PCI expansion slots
• Note 1: Legacy platform is not supported.
• Note 2: dTPM 2.0 module is required to enable Intel vPro and TPM technologies.
• Note 3: Intel® Platform Trust Technology (Intel® PTT) ready for Windows 11.